With the inline hockey season in full swing, players will find themselves needing certain pieces of equipment replaced as wear and tear becomes more apparent, or the gear just isn’t keeping up with your game anymore. One common piece of gear that gets replaced in these months is the padded shirt – and we’re here to keep you cool, light, and protected with our selection.
CCM RBZ Padded Shirt
The best-in-class for the perfect blend of performance and breathability, the CCM RBZ padded shirt is our pick for that all-around padded shirt with a fit for every level of play. With a pro compression fit that assists in blood flow to muscles and a lightweight stretch mesh with moisture wicking for that dry-and-cool feel throughout the game, the RBZ padded shirt is padded with U-Foam protection in key areas, maximizing airflow and providing a pro-level protection; with the material found in NHL shoulder pads to this day. Ventilated foam pads throughout the Torso, Ribs and Shoulders, the RBZ padded shirt prioritizes comfort and cool in their design.
Alkali Visium Padded Shirt
For that step up in protectiveness, we have the Alkali Visium Padded Shirt. 360-degree 3D Flex padding in a hex-cell construction create a close-to-the-body, flexible wrap while creating gapless protective coverage in the key padded areas. The Alkali Visium shirt prioritizes coverage with their 16-way stretch mesh lycra construction and increased shirt length, keeping the shirt mobile and secure against your body for a locked-in protective feel. Perfect for the player looking for a bit more protectiveness in key areas, while still allowing for comfort.
Tour Code 1 Upper Body
For the maximum coverage and protection package, the Tour Code 1 Upper Body padded shirt is layered throughout the shirt with their patented Custom ZURRICK dual density foam – a high-impact protection dual-layer foam that provides excellent impact mitigation. The anatomical segmentation in key areas throughout the padding, as well as kinetic compression padding provide a complete range of motion in a lightweight, low profile package. The Tour Code 1 shirt has the ultimate level of protection for the elite roller hockey player, with just a little compromise in breath ability when compared to the RBZ shirt. Note: the Tour shirts are considerably shorter than other brands, and can sometimes cut off just above the navel for some players depending on your height. (Read: Really heckin' short.)
Soon Discontinued – Mission Pro and Elite Padded Shirts
For those who prefer their tried-and-true setups, we have a small number of Mission Pro and Elite Padded Shirts left – though stock is dwindling as Mission slowly phases these shirts out of production. The Mission Pro shirt was known for its ice hockey shoulder-pad-like shoulder and bicep guards, with perforated protective foam located throughout the remainder of the torso for a “hybrid-shirt” style of protection. The Elite padded shirt provides a more traditional medium density foam coverage, similar in vein to the RBZ padded shirt, but with Bauer’s moisture-wicking and cooling 37.5 fabric. Grab your shirts for a stockpile today!
For a selection of our padded shirts and more, visit us in-store here in Vancouver, BC or online here at Coast to Coast Hockey Shop. Express shipping throughout Canada!
Use our TORSO10 discount for 10% off Padded Shirts this week!
CCM’s new Super Tacks Hockey Girdle marries the protective package of traditional hockey pants, with the mobility, performance, and close-to-the-body fit of roller hockey girdles. Using the NHL-favourite Reebok 9K Pro girdle as a foundation, CCM redesigned the girdle from the base up, using their patented D3O smart material - an adaptive material that reacts to a full range of impacts - to maximize comfort and protectiveness, while slimming down the profile to remove excess bulk. High-density foam thigh guards, molded JDP/D3O hip caps and spine guards, and a Pro-level 400-Denier nylon shell (for those using the pant both in ice and roller) round out the shell, providing elite performance and a 360-degree custom fit.
Being accustomed to the protectiveness of traditional ice hockey pants, and having worn the Reebok 9K Pro girdle for the past few years, I was excited to find that CCM were adding a girdle to their 2017 update to the Tacks line of protective equipment. With Warrior and Easton’s (now-defunct) modern girdle offerings, the 9K Pro ice girdle was a bulky suit of armor, compared to the competition’s slimmer bulletproof vest. Furthermore, it’s ice-hockey-first design meant that it didn’t breathe as well as other girdles that toe the line between the two sports - we were due for an update.
CCM D3O foam never ceases to amaze. The girdle out of the box was a much lighter, slimmer and sleeker rendition of the elite-protection girdle, bringing back the heritage of the 9K Pro girdle in the multitude of velcro straps that allow the girdle to be adjusted in length, width, and circumference around the body. The fit is now much more refined, and much more in line with the compression inline girdles.
Setup took a bit of time to get fully dialed-in to get the length perfect and the desired snugness. But after 15 minutes of work, the girdle held well against my body even without cinching up the waist belts. I was able to walk around the house, and up-and-down stairs with no restriction to my range of motion. Pads held where they were supposed to hold, and slid where they were supposed to slide, all without any gaps in coverage that can often occur when padding shifts during movement - we were good.
The girdle felt secure and mobile, and airflow was significantly better than comparable hybrid girdles I’ve tested in the past. Taking shots, slashes and even a skate blade at one point to the thighs and hip guards, I was pleasantly surprised by the fact that I didn’t feel the impacts much at all. The girdle, getting its first run-throughs has held up well and provided that low-profile, elite-performance protection and fit as advertised by CCM.
For the more budget conscious player, the Tacks 7092 girdle is available from our shop. With D3O foam found throughout the girdle, circumference adjustability in the thigh, waist and hips, and the same multi-density foams found on the Super Tacks girdle; the Tacks 7092 girdle is a spectacular option for the performance player.
The new CCM Super Tacks Girdle is a product we are very excited and pleased to offer here at Coast to Coast Hockey Shop. For more information, please contact us or come into the store, and one of our expert staff will find you your best fit.
Thanks for reading. Save a few bucks off Tacks products with coupon code "newtacks"
A little late, I know, but I should mention we now have a handful of CCM Tacks Roller Hockey Skates in the shop now!
CCM Tacks Inline Hockey Skates
Tacks are a great compliment to the Jetspeed line we also have in the shop. We wanted to bring in the the Tacks to offer a more complete selection for fitting all feet.
Besides their fit type, the Tacks are rock solid, we brought in 3 options:
We have the CCM Tacks Inline Hockey Skate which is the top model from the Tacks lineup - using a Carbon outsole and quarter package, Magnesium frame and Labeda Addiction wheels, this skate is built for power and speed. Available in D and E widths.
For a high performance skate without the higher price tag, the CCM Tacks 5R52 is also available in D and E widths. Still offering a high level of stiffness and comfort, with high caliber Labeda Dynasty wheels.
For the Junior sized skaters we brought in the CCM Tacks 3R52 Skates available in sizes 2-5 in D width. The boot is stiff for great response, but forgiving and comfortable for beginning, recreational or intermediate players.
Don't see your size available? Have any questions? Email! email@example.com
Save 10% on your next order! Enter in "snacks" at checkout to apply discount. Some items excluded from discount. Coupon will expire Wednesday March 2nd, 2016.